WD 10TB Ultrastar DC HC330 7200 rpm SATA III 3.5" Internal Data Center HDD WUS721010ALE6L4

WD Red Plus Internal HDD Overview

The 10TB Red Plus 7200 rpm SATA III 3.5" Internal NAS HDD from WD is built to handle the workloads of RAID-optimized NAS systems with up to 8 drive bays, including home offices and power users, small to medium businesses, and consumer and commercial NAS systems. This 10TB drive operates using a SATA III 6 Gb/s interface, a 256MB cache, and a rotational speed of 7200 rpm, which all help to ensure uninterrupted data transfers with a rate of up to 215 MB/s. This drive also features high levels of reliability, with 600,000 load/unload cycles, < 1 in 1014 non-recoverable read errors per bits read, a workload rate of 180TB per year, dual-plane balance control technology, and a 1 million hours MTBF. WD's NASware helps increase system compatibility, allowing Red Pro drives to be more easily integrated with your existing network infrastructure, while noise and vibration protection is provided by Rotation Vibration (RV) sensors.

Highlights

• 10TB storage capacity
• For RAID-optimized NAS systems with up to 8 bays
• Workload rating of up 180TB per year and 1 million hours MTBF

Ideal For

• Home offices and power users
• Small to medium businesses
• Commercial and consumer NAS systems

Tuned for NAS with NASware

Western Digital's exclusive NASware technology fine tunes drive parameters to match NAS system workloads, which helps increase performance and reliability.

Designed for Continuous Operation

Since your NAS system is always on, a reliable drive is essential. WD Red Plus hard drives are designed for systems that operate 24/7, giving users the confidence of knowing they can reliably access their data.

Tested for Dependable Compatibility

Western Digital partners with a wide range of NAS system vendors for extensive testing to ensure compatibility with most NAS enclosures.

Optimized for Lower TCO

WD Red Plus drives are engineered to use less power (versus previous models) and run cooler, which reduces operating costs and helps reduce heat in thermally challenged NAS boxes.

Powered for Strong Performance

Despite using less power, the drives have plenty of bandwidth to handle the mixed performance demands of multi-drive NAS systems.

Balanced for Increased Reliability

Hard drives that are not properly balanced may cause excessive vibration and noise in multi-drive systems, which could reduce hard drive life span and degrade the performance over time. WD's enhanced dual-plane balance control technology significantly improves balance and increases overall drive performance and reliability.

Desktop Drives vs. WD Red Pro

Compatibility

Unlike desktop drives, WD Red hard drives are specifically designed and tested for NAS and include NASware technology which fine tunes drive parameters to match NAS system workloads for optimum performance.

Reliability

Desktop drives aren't typically designed for the demands of an always-on NAS environment. WD Red hard drives are designed to perform under tough conditions encountered in high-intensity 24/7 multi-user NAS environments.

RAID Ready

WD Red hard drives are engineered with RAID error recovery control to help reduce failures within multi-bay NAS systems, unlike most desktop drives that are configured for generic use.

Noise and Vibration Protection

Designed to operate solo, desktop drives typically offer little or no protection from the noise and vibration present in a multi-drive system. WD Red hard drives include Rotation Vibration (RV) sensors that anticipate and proactively counteract disturbances caused by increased vibration often found in multi-bay NAS systems.

UPC: 718037886206